Want to give your guitar the ultimate protection and keep it looking stunning? Building a do it yourself guitar stand is a fantastic way to go. With a few inexpensive tools and materials, you can create a universal and easy-to-assemble stand that’ll keep your guitar safe and within reach. Designed with simplicity in mind, this DIY project requires just one piece of wood and no worries about glue, screws, or nails.
From inexpensive plans to DIY expertise, you’ll find 25 guides to get you started. And with multiple options to choose from, you can customize your guitar stand to fit your unique needs. Grab your drill, wood, and get started – you’ll be amazed at how easy it is to build a custom guitar stand from scratch.
Can I Make a Do It Yourself Guitar Stand with Inexpensive Materials and Tools?
You can create a basic guitar stand using inexpensive materials and tools. This project is perfect for guitar enthusiasts who like to tinker and want to save money.
Materials
- 1 x 1″ plywood or MDF board (12″ x 12″)
- 1/4″ foam board (12″ x 12″)
- 1″ wood screws
- 2″ wood glue
- Sandpaper
- Paint or stain (optional)
- Guitar strings or wire
Tools
- Circular saw or hand saw
- Drill
- Jigsaw or coping saw
- Sanding block
- Paintbrush or foam brush
- Henkels or pliers
Instructions
- Cut the plywood : Cut the 1 x 1″ plywood or MDF board into four equal pieces (3″ x 3″). These will be the legs of your guitar stand.
- Cut the foam board : Cut the 1/4″ foam board into two equal pieces (12″ x 6″). These will be the base and neck of your guitar stand.
- Assemble the stand : Apply wood glue to the legs and attach them to the base and neck using 1″ wood screws. Make sure everything is aligned properly.
- Sand and finish : Sand the entire stand to smooth out any rough edges. You can stain or paint the stand if you prefer a different color.
- Attach the guitar strings or wire : Use guitar strings or wire to create the neck support. You can attach them to the neck and legs using wood glue and screws.
- Add finishing touches : Use a sanding block to smooth out any rough edges. Apply a coat of polyurethane or varnish to protect the finish.
That’s it! Your DIY guitar stand is now complete. This project requires basic woodworking skills and minimal cost. You can customize the stand to fit your guitar’s shape and size. Happy building!
What’s the Best Way to Cut Wood for a Do It Yourself Guitar Stand without Using a Drill?
Cutting wood for a DIY guitar stand without a drill can be a bit challenging, but with the right techniques and tools, you can achieve high-quality results.
Gather Your Tools and Materials
- 1″ x 4″ x 8′ pine or cedar plank (for the base and sides)
- 1″ x 2″ x 8′ pine or cedar plank (for the shelves)
- Jigsaw or hand saw for cutting curved shapes
- Sandpaper for smoothening cuts
- Clamps for holding pieces together
- Measuring tape and square for precise measurements
- Safety goggles and a dust mask for protection
Cut the Base and Sides
- Cut the 1″ x 4″ plank into two pieces for the sides, each 24″ long.
- Cut the remaining plank into one piece for the base, 24″ x 4″.
Cut the Shelves
- Cut the 1″ x 2″ plank into two pieces for the shelves, each 20″ long.
- Sand the cut edges to smoothen them.
Assemble the Stand
- Use clamps to hold the sides together while you glue and nail the base to them.
- Attach the shelves to the sides using nails or screws.
What Materials Do I Need to Build a Do It Yourself Guitar Stand?
Building a DIY guitar stand is a fun and rewarding project that requires minimal materials and basic tools. Follow these simple steps to create a sturdy and functional stand for your guitar.
Materials Needed
- 1″ x 2″ lumber (2 pieces, 12″ long)
- 1″ x 1″ lumber (2 pieces, 12″ long)
- 1/4″ plywood (1 piece, 12″ x 12″)
- Wood glue
- 2″ wood screws
- Drill press
- Jigsaw or circular saw
- Sandpaper
- Polyurethane or varnish (optional)
Tools Needed
- Drill press
- Jigsaw or circular saw
- Sandpaper
- Hammer
- Tape measure
- Square
- Clamps
Instructions
- Cut the 1″ x 2″ lumber into four pieces, each 12″ long.
- Cut the 1″ x 1″ lumber into two pieces, each 12″ long.
- Assemble the base of the stand by gluing and screwing the 1″ x 2″ lumber pieces together.
- Cut the 1/4″ plywood to fit on top of the base.
- Assemble the guitar rest by gluing and screwing the 1″ x 1″ lumber pieces together.
- Attach the guitar rest to the base using wood screws.
- Sand the entire stand to smooth out any rough edges.
- Apply polyurethane or varnish to protect the stand and give it a finished look.
- Assemble the stand and adjust the guitar rest to fit your guitar comfortably.
Where Can I Find Affordable and Easy to Follow Plans for Making a Do It Yourself Guitar Stand?
If you’re a guitar enthusiast looking for a unique and affordable way to store your instrument, you’re in luck! There are plenty of DIY guitar stand plans available online that can help you create a sturdy and functional stand for your guitar.
Online Resources
Here are some reliable online resources that offer free or low-cost DIY guitar stand plans:
- Instructables : A popular website that features user-generated tutorials and plans for various DIY projects, including guitar stands.
- Pinterest : A visual discovery and planning website that allows you to browse and save DIY guitar stand plans and inspiration boards.
- YouTube : A video-sharing platform that offers a wide range of DIY guitar stand tutorials and plans.
- Woodworking forums : Online communities where woodworkers and DIY enthusiasts share their projects, including guitar stand plans.
Tips for Choosing the Right Plan
When searching for a DIY guitar stand plan, consider the following factors:
- Material : Choose a plan that uses materials you have readily available or can easily source.
- Level of expertise : Select a plan that suits your skill level, whether you’re a beginner or an experienced DIYer.
- Space constraints : Consider the size of your guitar and the available space where you’ll be placing the stand.
- Customization : Look for plans that offer customization options to fit your specific needs.
Get Creative with Your DIY Guitar Stand
Remember, the beauty of a DIY project lies in its uniqueness and customization. Don’t be afraid to experiment with different materials, designs, and features to create a stand that’s tailored to your guitar and personal style.
Start browsing through the online resources listed above and get inspired to create your own DIY guitar stand. Good luck and happy crafting!
